Question: Can I Use 1600mHz Ram In 1333mHz Motherboard?

Why does my 1600MHz RAM shows 1333MHz?

1333 is the default and every RAM set rated for that speed or faster will default to 1333.

Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP.

Just save and boot into windows to check it.

It will not harm anything..

Is cl9 better than cl11?

Thus, the CL9 ram was 1% faster memory performance, and 2.6% faster stream performance. I should point out that the CL9 was consistently faster than CL11 on all five passes. There you have it.

Can I use 1333MHz and 1600MHz RAM together?

Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Can 1600mHz ram work on 1066?

So the answer is that 1600 Mhz memory modules may not work in a slot that supports only upto 1066 Mhz. However the 1333 Mhz RAM worked.

Is 1333mHz RAM good for gaming?

Yes it definitely is. Recent benchmarks show that there is little difference, like 5% between 1333Mhz or super high-end 2133Mhz modules. So it’s kind of a waste to overspend on expensive RAM. Your extra dollars will be better spent on a SSD, or a better GPU or CPU.

Can I mix ram with different MHz?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

What is fastest ddr3 RAM?

Fastest DDR3 RAM is 3.2Ghz G. skill Trident X , the fastest DDR4 right now is only 100Mhz above that.

Does RAM speed have to match motherboard?

Just like the processor, memory runs at different clock speeds, check what speed the processor supports and match that to the RAM that you buy. … The OC speed that the motherboard is capable of is also listed on the motherboard spec and you should be looking to match these potential speeds when buying RAM.

Does dh61ww support 1600mhz RAM?

Splendid. Intel® Desktop Board DH61WW no, your mobo is limited to 1333mhz, no overclocking possible. but you will be able to run all 16gb. for optimal performance try tightening timings a bit!

Is 1600mHz RAM good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Can you use 1333mHz ram in 1066mhz?

Both memory modules should work and operate at 1066 MHz. If properly supported, the modules will operate in dual-channel mode, but both modules will be limited to the slower one, which is unlikely to be noticeable. There should not be any significant problems in terms of system performance or stability.

What is the difference between 1333MHz and 1600MHz RAM?

There is really no performance difference between running the RAM at 1333MHz compared to 1600MHz. The reason to buy 1600MHz is if you are heavily OCing. When you OC the CPU (unless you’ve got an unlocked multi like the 955) you also change the frequency the RAM.

Which is faster 1333mhz or 1600mhz?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

Does RAM speed matter?

Whether or not your RAM speed is fast enough will depend on the type of CPU that you have. Your RAM’s speed does not alter how fast your CPU goes, even when overclocked or hyper-threaded, but it can slow the CPU down depending on if your RAM is full or not.